Yideng doors and windows teaches you how to prolon

  • Detail

Do you know how to prolong the service life of steel and wood doors? Now let Yideng door and window tell you

do you know how to prolong the service life of steel and wood doors? Now let Yideng door and window tell you

first, when using steel and wood doors, don't hang heavy objects on the door leaves or avoid sharp objects from being scratched or scratched. When opening or closing the door leaves, don't use too much force or open the angle too large, so as to avoid damaging the steel and wood doors

second, do not often use hands with water stains (or other solutions) to open the steel and wood door lock, so as to prevent the door lock from changing color. When opening the door lock or turning the door lock handle, do not use too much force, so as to reduce the service life of the door lock. Hinges, door locks and other frequently moving hardware accessories should be tightened immediately when they become loose. When the steel wood door lock fails to open, you can add an appropriate amount of pencil lead foam to the key hole

third, when wiping the glass (glass fiber reinforced plastic wooden door), do not make the cleaning agent or water penetrate into the gap of the glass batten, so as to avoid the deformation of the batten. Don't use too much force when wiping the glass, so as to avoid glass damage and personal injury. After the glass is broken or there is a big bump, it must be repaired by professional maintenance personnel

fourth, when removing stains (such as fingerprints) on the surface of steel and wood doors, you can use a soft cloth to wipe them after getting wet with steam. It is easy to scratch the surface with a hard cloth. When the stains are too heavy, you can use neutral detergent, toothpaste or special detergent for furniture. After decontamination, wipe them immediately. The edges and corners of steel and wood doors should not be frequently rubbed, so as not to cause discoloration and damage of the decorative materials at the edges and corners. When removing dust from wooden products, if it is inconvenient to wipe with soft cotton cloth, you can use a vacuum cleaner to remove it. In order to maintain the surface gloss and service life of steel and wood doors, they should be cleaned and dedusted regularly, and their surfaces can be cured with a special curing liquid for wood decoration products

fifth, in spring and winter, pay attention to good indoor ventilation, maintain indoor humidity, and keep the steel and wood doors at normal room temperature and humidity, so as to prevent the deformation of wooden products due to excessive humidity and temperature difference, and the corrosion, edge banding and veneer material falling off of metal accessories. When using electric heaters or other heating equipment in winter, keep away from wooden products to avoid heating deformation

sixth, when painting the wall, the steel and wood doors should be covered to prevent the paint from falling on the product surface, which will peel and fade the finishing materials and affect the overall beauty

if the above six points are achieved, the use of steel and wood doors will be very good, and the service life of steel and wood doors will be better increased





Copyright © 2011 JIN SHI