The transformation of building materials and glass

2022-08-01
  • Detail

The transformation of energy-saving and emission reducing building materials glass enterprises is imminent. The situation this year is still very complex. In terms of the building materials industry, there are still many uncertain and unforeseen factors. The raw materials department will focus on the following ten tasks

according to the general idea of the management of the building materials industry this year, the Ministry of industry and information technology recently reassessed and established a number of large cement and flat glass enterprises supported by the state, encouraging them to merge and reorganize backward enterprises

the general idea of this year's management of the building materials industry: in accordance with the central economic work deployment, earnestly implement the scientificoutlookondevelopment, pay more attention to structural adjustment in maintaining growth, take industry access as the starting point, resolutely curb overcapacity and redundant construction, and promote mergers and acquisitions, technological transformation, elimination of backwardness, and energy conservation and emission reduction. We will formulate and issue major plans and policies, effectively strengthen and improve industry management, and promote the healthy and sustainable development of the building materials industry and the steady improvement of economic benefits

improve the industry management ability

strengthen the analysis of the development situation of the building materials industry and effectively deal with possible problems. It is the primary task to study and analyze the development situation of the industry and improve the ability of prediction, prediction and plan. The building materials system should put forward new and effective policy measures and suggestions in view of the prominent existing contradictions and emerging and tendentious problems

the transformation of building materials and glass enterprises for energy conservation and emission reduction is imminent.

curb overcapacity.

implement various policies and measures to curb overcapacity and repeated construction. This year, the building materials industry should continue to implement the spirit of several opinions of the State Council on curbing overcapacity and redundant construction in some industries and guiding the healthy development of the industry (GF [2009] No. 38 document), and focus on the problems in the cement and flat glass industries

ten items boost the development of building materials industry the transformation of cement and glass enterprises is imminent

eliminate backward production capacity

on April 28, the executive meeting of the State Council deployed to further intensify efforts to ensure the realization of the "Eleventh Five Year" energy conservation and emission reduction goals

according to the requirements of GF [2009] No. 38 document and GF [2010] No. 7 document on eliminating backward work, we must further strengthen the elimination work and strive to completely eliminate backward production capacity that does not meet the requirements of industrial policies and environmental protection, energy consumption, quality and safety within three years. Therefore, eliminating the backward is a hard task for the management of the building materials industry in the next three years

preparation of the 12th Five Year Plan

at present, the Ministry of industry and information technology has officially launched the preparation of the 12th Five Year Plan. In addition to formulating the industry wide development plan for the 12th Five Year Plan, the building materials industry will accelerate the upgrading of plastic granulator technology, and also focus on the formulation of five special plans for cement, flat glass, building and sanitary ceramics, new building materials and non-metallic minerals

according to the overall deployment of the State Council on cultivating strategic emerging industries, the relevant work in the field of new materials is led by the Ministry of industry and information technology. Non metallic new materials are an important part of the whole new materials. Therefore, the preparation of the "12th Five Year" development plan of the building materials industry should also pay attention to integrating the relevant contents of new building materials

promoting merger and reorganization

the guiding opinions on accelerating the promotion of enterprise merger and reorganization led by the Ministry of industry and information technology has completed the drafting and reporting of documents, and will be issued soon. The merger and reorganization of building materials industry focuses on cement and glass industries. Based on all 3D printing materials, we will reassess and establish a number of large cement and flat glass enterprises supported by the state in accordance with the principles of openness, fairness and impartiality, and encourage them to merge and reorganize backward enterprises, become bigger and stronger, and promote structural adjustment and tensile strength( σ b) When the stress continues to increase after exceeding the yield strength, the strain also increases continuously to improve the industrial concentration

increase technological transformation to promote energy conservation and emission reduction

the building materials industry was not included in the national key adjustment and revitalization industries because it was less affected by the international financial crisis. However, according to the needs of energy conservation, emission reduction and structural adjustment, a number of key supported technological transformation projects were arranged in the national special fund for technological transformation last year, and appropriate arrangements will continue to be made in the national special fund for technological transformation this year. Strengthen standards and quality management

this year, the building materials industry will earnestly implement the 2010 plan for the preparation and revision of building materials standards, and conscientiously implement the new national standard for flat glass implemented on March 1 this year. Attach importance to the quality management of the building materials industry, speed up the formulation and issuance of the quality management regulations for cement enterprises and relevant supporting regulations, and better guide the cement enterprises to carry out quality work

control the total amount of key non-metallic mineral products

according to the requirements of the notice on taking comprehensive measures to control the mining and production of refractory clay fluorite (GBF [2010] No. 1) issued by the State Council office, the Ministry of industry and information technology led the formulation and issuance of the access standards for the high alumina refractory clay and fluorite industry jointly with seven ministries, commissions and bureaus, which have been implemented since March 1. Although these two products have small industries, they are extremely important and influential in the international market. By controlling the total production volume of these two products, we can also accumulate experience for the export control of other important metal and non-metal products

in the near future, the raw materials department of the Ministry of industry and information technology will promptly issue the regional production control indicators of high alumina refractory clay fluorite in 2010. It is hoped that the relevant provincial industrial authorities will issue the relevant production enterprises in strict accordance with the plan. This indicator is a national mandatory plan. The specific indicator allocation should highlight the key points and favor large enterprises with technology, capital and management advantages and high environmental protection level. At the same time, we should strengthen the supervision and management of the implementation of production indicators

promoting the integration of informatization and industrialization is a historical mission undertaken by the Ministry of industry. Promoting the integration of informatization and building materials industry in the building materials industry will be conducive to the structural adjustment of the whole building materials industry in the new era. 1 The test length (average distance between wires) of the collet position of the conditioning experimental machine is 180mm ± 1mm. This year, the Ministry of industry and information technology plans to formulate and release the guiding opinions on promoting the integration of industrialization and industrialization of building materials industry through joint research with the association

Copyright © 2011 JIN SHI